SUT
Small Universal Test Machine
 SUT 3000N / 520mm |
SUT, the Small Universal compression/tension Tester offers a unique solution for small scale testing, where
limited force is required for tension and compression testing. It is ideally suited to quality assurance and
process control as well as research and development. The machine is equipped with special grips and
compression plates, according to the type of specimens that are to be tested. Exchanging the grips for
different types of testing is very simple.. The standard maximum stroke length is 520mm, but it depends
slightly on the products tested and the grips required for the specific type of testing.
It is capable of performing a range of testing procedures and can be set up for relevant international or
national standards. The various testing procedures can easily be set up by using the keyboard situated on
the machine. In the display the actual measurements of load/deformation can be followed while testing a
specimen. The load/deformation is displayed in Newton. When the maximum load has been found it is
indicated in the display, together with the corresponding deformation. Furthermore, the fracture load and
deformation can be displayed.
Specifications
| SUT 3000/1000 | SUT 3000/325 | SUT 3000/520 | SUT 5000/520 |
| Loadcell Capacity | 3000 N | 3000 N | 3000 N | 5000 N |
| Weight | 45 kg | 40 kg | 40 kg | 45 kg |
| Max stroke length | 3000 mm | 325 mm | 520 mm | 520 mm |
| Free arm (frame dist) | 66 mm |
| Picture text A | SUT 3000N / 520mm |
| Resolution | 0.02 N | 0.02 N | 0.02 N | 0.05 N |
| Supply Voltage | 220/240 V or 110/120 V, 50-60 Hz |
| Speed Range | 1-500 mm/min as standard |
| Height | 1518 mm | 941 mm | 1036 mm | 1516 mm |
| Width | 300 mm |
| Depth | 390 mm |
| Loading speed control | Servo controlled travelling speed. |
| Control system | The machine can operate on its own - without any connection to a PC. The machine can also be supplied in a Professional Version where the advanced TramQA software makes almost any testing and reporting fully automatic. - refer the separate Tram-QA brochure. |
Standards
| ISO 1924-2 | Paper and board - Determination of tensile properties |
Please contact TRAM or your local distributor for additional information.
See also: